Kenwood TK-2180E - Manual (Page 50)

43
■ P
LAYBACK
To play back a recorded conversation, memo, or message:
1 Press the key programmed as Playback to enter
Playback mode.
• If the last action on your transceiver was to auto record
your conversation, "
" will appear on the display,
otherwise a recording channel with the time of the
recording will appear. To store the conversation record in
the next available recording channel, press the Side 2
key. To clear the conversation, press the A or # key. To
skip to the stored recording channels, press the S
or
key. To skip back 5 seconds, press the <B key. To
skip ahead 5 seconds, press the C> key.
2 Rotate the selector to select the channel which you
want to play back.
• " " represents automated reply messages.
• " " represents conversation records.
• " " represents voice memos.
3 The transceiver will announce the channel, then the
recording will automatically play back.
• When the entire recording has been played, “ ”
(end of message) is displayed.
• To delete the selected recording, press the A or # key. To
clear all the recorded data, press and hold the A or # key.
A confirmation message will appear on the display. Press
the S or
key to delete the recording(s) or the A or # key
to cancel.
V
OICE
G
UIDE
When changing the zone, channel, or operation mode, an
audio voice will announce the new zone, channel, or mode,
after it has been selected. (Voice Annunciation can be
activated or deactivated by your dealer.)