Kenwood TK-2180E - Manual (Page 27)

20
S
CAN
R
EVERT
You can select Revert zones and channels using the selector
and the Zone or CH/GID keys.
Eight types of Scan Reverts which can be programmed by
your dealer are available.
• Last Called Revert: The last zone/ channel received is assigned
as the new revert zone and channel.
• Last Used Revert: The last zone/ channel responded to is
assigned as the new revert zone and channel.
• Selected: The last zone/ channel selected is assigned as the
new revert zone and channel.
• Selected + Talkback: If the zone/ channel has been changed
during Scan, the newly selected zone/ channel is assigned as the
new revert zone and channel. The transceiver “talks back” on the
current receive channel.
• Priority 1/ Priority 2: If your dealer has programmed a Priority
channel (either Priority 1 or Priority 2), this channel is the revert
zone and channel.
• Priority 1 + Talkback/ Priority2 + Talkback: If your dealer has
programmed a Priority channel (either Priority 1 or Priority 2), this
channel is the revert zone and channel. The transceiver “talks
back” on the current receive channel.
P
RIORITY
S
CAN
A Priority channel must be programmed in order for Priority
Scan to function.
The transceiver will automatically change to the Priority
channel when a signal is received on it, even if a signal is
being received on a normal channel.
• The indicator represents the Priority 1 channel.
• The indicator represents the Priority 2 channel.
• The indicator represents both the Priority 1 and Priority 2
channel.