Kenwood KDC-BT40U - Manual (Page 18)

18 | KDC-BT40U/KDC-BT30
Other Functions
Clock Adjustment
1 Turn on this unit.
Press the [SRC] button.
2 Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
“FUNCTION” is displayed.
3 Cancelling “TIME SYNC” mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “SETTINGS”
> “CLOCK” > > “TIME SYNC”.
Turn the [VOL] knob to select “OFF”, and then
press the [VOL] knob.
Display Overview
“CLOCK ADJUST” Sets the clock. You can do this adjustment when
“TIME SYNC” is set to “OFF”.
“TIME SYNC” Synchronizing the RDS station time data and this
unit’s clock.
OFF/ON
(Factory setting: Underlined)
4 Enter Clock adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “SETTINGS”
> “CLOCK” > “CLOCK
ADJUST” (“CLOCK ADJ”).
The hour display blinks
5 Adjusting Clock
Turn the [VOL] knob to set the hours and press
it when to finish the hour adjusting.
The minute display blinks.
Turn the [VOL] knob to set the minutes and
press it when to finish the minute adjusting.
6 Exit Function Setting mode
Press the [ ] button for at least 1 second.
Demonstration Mode Setting
Turning the demonstration mode ON/OFF.
1 Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
“FUNCTION” is displayed.
2 Select Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO MODE”.
3 Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4 Exit Function Setting mode
Press the [ ] button for at least 1 second.
Initial Setting
You can select following Initial Setting items.
1 Select the Standby source
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
“FUNCTION” is displayed.
3 Select the function item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “INITIAL SET”
> Function item.
Function item Selectable setting/item
“PRESET TYPE” TYPE NORMAL (TYPE NORM):
1 station can be assigned to 1 preset button in each
of 4 bands (FM1, FM2, FM3, and AM), i.e., a total of
24 stations (6 stations x 4 bands) can be preset.
TYPE MIX:
A total of 6 stations can be assigned to a total of 6
preset buttons regardless of band (FM1, FM2, FM3,
and AM). You can recall a preset station without
switching between bands.
“KEY BEEP” Setting the operation check sound (beep sound)
on/off.
OFF/ON
[SRC] [VOL]
[ ]
Release button
$AA'A'PINKUJKPFF