Kenwood KDC-BT40U - Manual (Page 9)

English | 9
Function of KDC-BT40U
Audio File/ iPod Setting
You can select following setting items.
1 Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
“FUNCTION” is displayed.
2 Select the function item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “SETTINGS”
> Function item.
Function item Selectable setting/item
“SKIP SEARCH” The number of songs to be skipped is
determined by the ratio of the total number of
songs in the list which is selected. (iPod and
KENWOOD Music Editor File only)
0.5%/1%/5%/10%
“MPLIST DELETE” Deletes the saved My Playlist. <My Playlist for
iPod>(page 8) (iPod only)
NO/YES
(Factory setting: Underlined)
3 Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
When select “MPLIST DELETE”:
Turn the [VOL] knob to select “YES”, and then
press the [VOL] knob.
Deletes the saved My Playlist.
4 Exit Function Setting mode
Press the [ ] button for at least 1 second.
Function of KDC-BT40U with iPod
iPod Control by Hand Mode
Allowing you to operate iPod with the control on
the iPod.
Press the [1] button.
Pressing the button toggles the setting between
iPod control by hand mode on (“HANDS ON”) and
off (“HANDS OFF”).
⁄
• In the iPod Control by hand mode, iPod cannot be
operated using this unit.
• This mode is not compatible with music information
display. The display will show “iPod MODE”.
• iPod can be operated when it conforms to the iPod
control function.
Function of remote control (Optional Accessory)
Direct Music Search
Searching the music by entering the track number.
1 Enter Direct Music Search mode
Press the [DIRECT] button.
2 Enter the music number
Press the number buttons.
3 Search the music
Press the [ 4] or [¢] button.
Cancelling Direct Music Search
Press the [ ] button.
⁄
• Direct Music Search cannot be performed during playing
of iPod, “Music Editor” media, Random play, or scan play.
$AA'A'PINKUJKPFF