Kenwood TH-K2E - Discontinued - Manual (Page 112)

98
• If the transmission does not begin, you must
readjust the VOX Gain so that transeiver
transmits while you are speaking. To readjust the
gain, press and hold [PTT] then turn the Tuning
control to select a more sensitive gain level.
• While readjusting the gain, you can release
[PTT]. The transceiver will remain in Adjustment
Mode for approximately 5 seconds.
3 Adjust the VOX Gain by turning the Tuning control
until the transceiver reliably switches to transmission
mode each time you speak while the transceiver is
transmitting.
From the Menu:
1 Continue from step 1 and 2 from VOX (Voice-
Operated Trasmission) on page 97.
2 Press [MENU] to store the VOX Gain level.
• “VOX” appears on the bottom right of the display when
the VOX function is ON.
3 Press any key other than [LAMP], [MONI/SQL] and
[MENU] to exit Menu Mode.
4 Adjust the VOX Gain, performing steps 1 to 3 until
the transceiver reliably switches between
transmission and reception each time you speak.
• The setting should not allow background noise to
switch the transceiver to Transmission Mode.