Kenwood TH-K2E - Discontinued - Manual (Page 51)

37
A
UTOMATIC
R
EPEATER
O
FFSET
(TH-K2AT/ E/ ET
ONLY
)
This function automatically selects an offset direction,
according to the frequency on the 2 m band. The
transceiver is programmed for offset direction as shown
below. To obtain an up-to-date band plan for repeater
offset direction, contact your national Amateur Radio
association.
TH-K2AT K/ K2 only
+ – – – + S S S S
144.0 145.5 146.4 147.0 147.6
145.1 146.0 146.6 147.4 148.0 MHz
S: Simplex
This complies with the standard ARRL band plan.
TH-K2E/ K2ET only
S S
S: Simplex
–
144.0 146.0 MHz 145.8 145.6
Note: Automatic Repeater Offset does not function when the
Reverse function is ON {page 38}. However, pressing [F], [MENU]
after Automatic Repeater Offset has selected an offset (split) status,
exchanges the receive and transmit frequencies.
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 9 (ARO).
3 Press [MENU].
4 Turn the Tuning control to switch the function “ON”
(default) or “OFF”.
5 Press [MENU] to store the setting or [PTT] to cancel.