Kenwood TH-K2E - Discontinued - Manual (Page 25)

11
• A high pitched double beep sounds and a Power-ON
message appears momentarily. The various indicators
and the current operating frequency appear on the LCD.
• The transceiver stores the current parameters when it
is turned OFF and automatically recalls these
parameters the next time you turn the transceiver ON.
2 Turn the VOL control clockwise, to the 11 o’clock
position.
3 Turn the Tuning control to select a reception
frequency.
VOL
ENC
.
• You may further turn the VOL control to adjust the
volume level of the signal.
4 To transmit, hold the transceiver approximately 5 cm
(2 inches) from your mouth.
5 Press and hold [PTT], then speak in your normal
tone of voice.
6 Release [PTT] to receive.
7 Repeat steps 4, 5 and 6 to continue communication.