Kenwood TH-K2E - Discontinued - Manual (Page 76)

62
4 Press [MR] to store the start frequency in the
memory channel.
5 Turn the Tuning control to select your desired
end frequency.
6 Press [F], [MR] then turn the Tuning control to
select a channel from U0 ~ U2, corresponding to
the channel selected in step 4.
• For example, if you selected L0 in step 4, select U0
for the end frequency.
7 Press [MR] to store the end frequency in the
memory channel.
■ Performing Program Scan
1 Press [VFO].
2 Turn the Tuning control to select a frequency
within the frequency range of memory channel
L0/U0 ~ L2/U2.
3 Press [VFO] (1 s) to start Program Scan.
4 To stop Program Scan, press [VFO] or [PTT].
Note:
◆ If you press [MONI/SQL], Program Scan temporarily pauses.
Release [MONI/SQL] to resume scanning.
◆ The transceiver stops scanning when it detects a signal.
◆ If more than 2 Program Scan channel pairs are stored and
overlaps the frequency range among the pairs, the smaller
Program Scan memory channel number has priority.