Teledex I Series - Manual (Page 21)

I SERIES ANALOG USER GUIDE www.teledex.com 21
I SERIES AT SERIES PHONES (ANALOG TRIMLINE)
the large oval button on the keypad, next to the
volume keys. This performs the FLASH function.
ADJUSTING THE RING VOLUME
Locate the ringer volume control on the back of
the telephone. Slide the switch to the desired
LOW or HI ring volume.
ADJUSTING THE HANDSET VOLUME
In compliance with the Americans with Disabilities
Act, this phone has an adjustable handset volume
feature. To adjust, locate the volume UP and
DOWN keys on the keypad. Press the desired key
to achieve the desired volume level.
REDIAL
To redial the last telephone number dialed, lift the
handset from the cradle and press the REDIAL
key.
MUTE KEY
The phone has a momentary MUTE key on the
handset. To mute the handset microphone,
press and hold the MUTE key. To resume your
conversation, simply release the key.
CONFERENCE (TWO-LINE MODELS
ONLY)
On two-line telephones, the CONFERENCE key
allows the user to include two other parties in a
three-way conversation. After placing or receiving
a call to/from the first party, place that party on
hold by pressing the HOLD key. Using the second
line, place or receive the second call. Press the
CONF key to join all three callers.
USING THE HOLD KEY (TWO-LINE
MODELS ONLY)
TO PLACE A CALL ON HOLD
1. With a call active, press the HOLD key.
2. The red line LED will change to a slow
blink indicating the call is on hold.
TO REMOVE A CALL FROM HOLD
1. Press the line key of the call on hold. This
removes the call from hold.
2. The red line LED will remain illuminated
for the duration of the active call.
CHANGING PHONES AFTER PLACING A CALL
ON HOLD
1. Place the call on hold, as above.
2. Pick up the call at another telephone that
is on the same line.
Care and Maintenance
• Keep the telephone dry. If it gets wet, wipe
it dry immediately. Liquids might contain
minerals that can corrode the electronic
circuits.
• Use and store the telephone in a normal
temperature environment. Temperature
extremes can shorten the life of electronic
devices and distort or melt parts.
• Keep the telephone away from excessive
dust and dirt which can cause premature
wear of parts.
• Wipe the telephone with a damp cloth
occasionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or strong
detergents to clean the system.