Teledex Opal Series - Manual (Page 10)

10 www.teledex.com OPAL SERIES USER GUIDE
Unpacking Your Telephone
This package should contain the following:
• Telephone base unit
• Handset
• Coiled handset cord
• Straight line cord
Optional items to be ordered separately:
• Wall mount adaptor bracket
• Short line cord for wall mounting
Installation
CAUTION INFORMATION
• Never install telephone or network wiring
during a lightning storm.
• Never install telephone or Ethernet jacks in
wet locations unless the jack is specifically
designed for wet locations.
• Never touch uninstalled telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
• Use caution when installing or modifying
telephone and network lines.
CONNECTING THE HANDSET CORD
A 10 ft. modular handset coil cord is provided.
To install, simply plug one end of the coil cord
into the jack at the base of the handset and the
other end into the jack located on the end of the
telephone base marked Handset.
CONNECTING THE LINE CORD
A 15 ft. modular line cord is provided. To install,
simply plug one end of the cord into the modular
jack at the top end of the base unit and the other
end into the wall jack.
Features
1. Speed-Dial Memory Keys: 3, 5, 10, or 0 user
programmable speed-dial keys with 32-digit
capacity. [Flash] and [Pause] are storable.
Speed-dial memory is non-volatile RAM, so
programming is retained without the need
for batteries or telephone line power.
2. FLASH Key: Generates a 600 ms (0.6
seconds) hook switch “tap” signal. Utilized
to access special features on PBX systems.
The Flash function is programmable at
100 ms to 1000Ms (default is 600 ms). This
button is located underneath the faceplate.
3. HOLD Key: Controls the “local hold”
function. Each time it is pressed, the [Hold]
key toggles the local hold mode on or off.
An LED indicator located above the [Hold]
key displays the on-hold status.
4. REDIAL Key: Redials the last-dialed
telephone number, up to 32 digits.
5. STORE Key: Utilized to program the speed-
dial memory keys and the voice mail
retrieval touch bar. This button is located
underneath the faceplate.
6. MUTE Key: Sets the microphone mute
function On and Off. The LED indicator
above the [Mute] key displays the On/Off
status of the mute function. When mute is
on, the handset and hands-free microphone
audio is turned off. You will be able to hear
the party at the other end of your call, but
they will not be able to hear you.
7. SPEAKER Key: Sets the hands-free
speakerphone function On or Off. The LED
indicator located above the [Speaker] key
displays the status of the speakerphone.
8. Data Port: Provides a convenient extension
of the telephone line in use for connecting
a device such as a modem, fax, or
answering machine.
OPAL SERIES 1-LINE CORDED AND TRIMLINE PHONES