Teledex Opal Series User Manual

Page 16

Advertising
background image

16

www.teledex.com

OPAL SERIES USER GUIDE

PROGRAMMING FLASH TIMING

Flash timing options are 100 ms through 1000
ms, programmable in 100 ms increments. The
default Flash timing is 600 ms.

1. Leave handset in cradle/on-hook.
2. Press the STORE key once.
3. Program Flash by pressing 1 for 100 ms, 2

for 200 ms, etc.

4. Press STORE key.
5. Press FLASH key.

PROGRAMMING PAUSE TIMING

Pause timing options are 1 second through 5
seconds, programmable in 1 second increments.
The default pause timing is 3.5 seconds.

1. Leave handset in cradle/on-hook.
2. Press the STORE key once.
3. Program PAUSE by pressing 1 for 1

second, 2 for 2 seconds, etc.

4. Press STORE key.
5. Press PAUSE/REDIAL key.

FLASH HOOK FUNCTION—[FLASH]

The Flash function is used to access PBX features
or Telco line features such as Call Waiting. The
Flash function is a 600 ms timed line break. If
the Flash function will be used often, store the
feature into memory located for easy access as
follows:

1. Leave handset in cradle/on-hook.
2. Press STORE key.
3. Press FLASH key.
4. Press STORE key.
5. Press the memory location where the

FLASH is to be stored.

MESSAGE WAITING AND RETRIEVAL

Pressing the touch bar automatically turns on
the speakerphone and then dials into a user-
programmed voice mail system to retrieve
messages.

1. Leave handset in cradle/on-hook.
2. Press STORE key.
3. Enter the number to be stored using the

numeric dial pad.

4. Press STORE key.
5. Press the red Message Waiting bar to

store.

In Case of Power Outage

The phone base will function without commercial
power (but the handset will not operate).
Ringer:
When receiving a new call, the phone
base will ring, but not the handset.
Pick up: Press the line key to pick up/go off-hook.
Dial: Under off-hook status, the loudspeaker and
microphone will receive sound, and calls can be
placed using the dial pad.
Hang-up: After talking, press the speaker or line
key to hang up.
Note: Without commercial power, the base unit only
supports dialing and calling; the indicator lights will
fail to light; and the Redial, Hold, Flash, and handset
will not operate.

OPAL SERIES 1-LINE CORDLESS AND REDIDOCK PHONES

Advertising