Teledex Opal Series - Manual (Page 14)

14 www.teledex.com OPAL SERIES USER GUIDE
Features
• Phone circuit can directly drive hands-free
• Digital wireless/no interference technology
• 10 programmable speed-dial keys for storing
up to 24 elements (digits and characters such
as *, #, Flash, and Pause)
• Message Waiting Indicator and OneTouch
message retrieval key integrated into design
• Handset auto-sync registration
• Each base unit can register up to 4 additional
handsets
• Handset battery low-voltage warning
• Message high- and low-voltage detection
• Message for reverse polarity Line 1 or Line 2
• Extension detection function
Operation
It’s important to note that both the handset and the
base need time to “boot up” when first powered up.
The base station may require up to 1 full minute
after applying AC power. For the handset it can also
take up to 1 full minute after putting in the battery.
In the case of a discharged battery the handset may
need to charge for a minimum of 10 to 15 minutes
before it will begin to operate properly.
VOLUME CONTROL
Ringer volume control: The ringer volume is
controlled by the “ Volume +/–” keys.
There are 5 steps to the volume levels.
HANDSET VOLUME CONTROLS
The handset volume controls increase or
decrease the volume of the handset.
When the handset is off-hook or the Speaker key
engaged on speakerphones, press the volume
control keys to increase or decrease the volume.
The handset volume control is a 5-step operation.
All models are hearing aid compatible.
ON-HOOK AND OFF-HOOK/PICK-UP
AND HANG-UP
Base unit: To get a dial tone with off-hook status,
press line key to pick up with speaker. To go on-
hook, press line key or speaker key to hang-up.
Handset: Press On/Off key in the handset
faceplate to pick-up or hang-up.
HOLD
Base unit and handset: Controls the “local hold”
function. Each press of the [Hold] key toggles local
hold mode on or off. An LED indicator located
above the [Hold] key displays the on-hold status.
MUTE
The Mute key toggles the microphone mute
function on and off. The LED indicator above
the [Mute] key displays the On/Off status of the
mute function. When Mute is on, the handset and
hands-free microphone audio are turned off. You
will be able to hear the party at the other end of
your call, but they will not be able to hear you.
REDIAL
Redials the last-dialed telephone number, up to
24 digits. After 30 minutes, the redial number
will automatically be removed (for security and
privacy).
MESSAGE
1. The hidden 3-position switch marked
TYPE LR1 LR2 configures the message-
waiting lamp.
2. For most applications the TYPE position
will work. This is the factory default
setting. Always try the TYPE position
first: If the message lamp blinks when a
message is in the mailbox, this confirms
that TYPE is the correct setting.
OPAL SERIES 1-LINE CORDLESS AND REDIDOCK PHONES