Teledex Opal Series - Manual (Page 12)

12 www.teledex.com OPAL SERIES USER GUIDE
PROGRAMMING FLASH TIMING
Flash timing options are 100 ms through 1000
ms, programmable in 100 ms increments. The
default Flash timing is 600 ms.
1. Lift the handset.
2. Press the STORE Key once.
3. Program FLASH by pressing 1 for 100 ms,
2 for 200 ms, etc.
4. Press STORE.
5. Press FLASH.
6. Hang up phone to exit programming.
PROGRAMMING PAUSE TIMING
Pause timing options are 1 second through 5
seconds, programmable in 1 second increments.
The default pause timing is 3.5 seconds.
1. Lift the handset.
2. Press the STORE Key once.
3. Program PAUSE by pressing 1 for 1
second, 2 for 2 seconds, etc.
4. Press STORE.
5. Press PAUSE/REDIAL.
6. Hang up phone to exit programming.
FLASH HOOK FUNCTION—[FLASH]
The Flash function is used to access PBX features
or Telco line features such as Call Waiting. The
Flash function is a 600 ms timed line break. If the
Flash function will be used often, store the feature
into memory located for easy access as follows:
1. Lift the handset then press the STORE Key.
2. Press the FLASH Key.
3. Press the memory location wherein the
[Flash] is to be stored.
4. Hang up the handset.
MESSAGE
Pressing the touch bar automatically turns on
the speakerphone and then dials into a user-
programmed voice mail system to retrieve
messages.
1. Lift the handset.
2. Press the STORE Key.
3. Enter the number to be stored using the
numeric dial pad.
4. Press the red Message Waiting bar to
store.
5. Hang up the handset.
OPAL SERIES 1-LINE CORDED AND TRIMLINE PHONES