Using the data port, Adjusting the ringer volume, Ring cadences – Teledex B-Series User Manual

Page 12: Operation

Advertising
background image

3.3 WALL MOUNTING CLIP

1)

Located on the front of the telephone, above the speaker grill, is the wall

mounting clip. Remove this clip by firmly pushing it upward, in the

direction of the hook switch.

2)

Rotate the clip 180º so that the side with the protruding edge is towards

the top. This edge will hold the handset (please refer to figure 5.)

4. USING THE DATA PORT

The data port is located on the right hand side of the telephone, as it is facing you.

Use this jack to connect a laptop or desktop computer, answering or fax machine in

parallel to the same phone line to which the telephone is connected.

5. ADJUSTING THE RINGER VOLUME

Your B120 has three ringer volume levels: Off, Low and High. To adjust, slide the

switch located along the right hand side of the telephone to the desired ringing level.

6. RING CADENCES

Your phone has three ring cadences, or patterns. To change the cadence, slide the

switch located along the right hand side of the telephone to one of the musical notes

icons located beneath the switch (please refer to Figure 7.)

7. OPERATION

7.1 PLACING AND ANSWERING CALLS USING THE HANDSET

To make a call, pick up the handset. When you hear the dial tone, dial the desired

number. To answer an incoming call, pick up the handset or press the SPEAKER key.

To end a call, place the handset back on the cradle or press the SPEAKER key again.

7.2 HANDSET VOLUME CONTROL

There are three (3) volume levels for the handset volume. To increase or decrease the

handset volume, press the VOLUME UP or DOWN keys.

7.3 USING THE SPEAKERPHONE

To place or answer a call using the speakerphone, press the SPEAKER key. The

SPEAKER indicator will light and the phone will go off hook.

To end a speakerphone call, press the SPEAKER key again. The SPEAKER indicator

light turns off.

7.4 SWITCHING BETWEEN HANDSET AND SPEAKERPHONE

To switch from the handset to the speakerphone during a call, press the SPEAKER

key, and place the handset on the base.

To switch from the speakerphone to the handset, lift the handset and speakerphone

will automatically turn off.

7.5 ADJUSTING THE SPEAKERPHONE VOLUME

There are three (3) volume levels for the speakerphone. To increase or decrease the

SPEAKERPHONE volume level, press the VOLUME UP or DOWN keys.

7.6 USING A HEADSET

Plug a standard 2.5 mm headset plug into the headset jack on the right hand side of

the telephone. You may place and receive calls by pressing the “SPEAKER” key.

7.7 USING REDIAL

The redial function allows you to redial the number that was last dialed. Pick up the

handset, or press the SPEAKERPHONE button, and press the REDIAL key. The

number will be dialed automatically.

7.8 USING FLASH

The FLASH key supports feature such as call waiting. For example, if you have

subscribed to call waiting, press FLASH to answer an incoming call without

disconnecting the current call. Press FLASH again to return to the first call.

4

5

FIGURE 5

FIGURE 6

FIGURE 7

WALL MOUNTING CLIP

DATA PORT

RINGING
VOLUME

RING
CADENCES

DATA
PORT

Advertising