Fixed connector, 26-pin – MagTek IntelliStripe 60 99875135 User Manual
Page 16
Advertising
![background image](/manuals/413733/16/background.png)
IntelliStripe 60, TTL Insertion Reader
8
Figure 2-3. Dimensions for Mounting
Fixed Connector, 26-Pin
Figure 2-4 shows the location of the 26-pin Fixed Connector. Table 2-1 lists the I/O Fixed
Connector pin numbers, Signal names, and the I/O direction with respect to the Reader (IN is in
to the Reader, and OUT is out of the Reader).
Note
The 26-pin header is not a locking connector. If there is
considerable cable movement, it is advisable to provide strain
relief by using cable ties in appropriate places outside of the unit.
0.100 = Dimensions in inches
[2,54 ] = Dimensions in millimeters
Advertising