Flex connector, 10 pin – MagTek IntelliStripe 60 99875135 User Manual
Page 18
IntelliStripe 60, TTL Insertion Reader
10
Flex Connector, 10 Pin
Figure 2-5 shows the location of the Flex Connector. Table 2-2 lists the I/O Flex Connector pin
numbers, Signal names, and the I/O direction with respect to the Reader (IN is in to the Reader,
and OUT is out of the Reader).
Figure 2-5. Flex I/O Connector Location and Pin Numbers
Table 2-2. Pin List for Flex Cable
Pin Number
Signal Name
I/O Direction
1
Card Seated
OUT
2
ICC-C8
Undefined*
3
ICC-C7 Data
IN/OUT
4
ICC-C6 Programmable Power
IN
5
ICC-C1 Power
IN
6
ICC-C2 Reset
IN
7
ICC-C5 Ground
IN
8
ICC-C3 Clock
IN
9
ICC-C5 Ground
IN
10
ICC-C4
Undefined*
* Signals ICC-C8 and -C4 (pins 2 and 10) are undefined by ISO 7816.
These contacts are often used with non-ISO memory-type cards.