MagTek IntelliStripe 60 99875135 - Manual (Page 23)

15
APPENDIX A. OPTIONS
See Appendix D for a full list of all available options.
SMART CARD OPTION
The location and parts of the Landing Contact Assembly are shown in Figure A-1.
Figure A-1. Smart Card Landing Contact Assembly
The TTL PCB provides connections to all 16 ICC contacts as defined by ISO and CP8/AFNOR
specifications. Pins 1, 2, 3, 4, 5, 6, and 8 on the 26-pin I/O connector will provide a direct
connection to the associated IC contact. During self-test, the pin 7 Data contact will be
“disconnected” from the data contact of the ICC card and allowed to “float”.
Flex Circuit
Interconnect
to PCB
ISO Contacts (8)
CP8 Contacts (8)
(Not Present)
Return Spring
Integral Card
Landing Switch