Section 1. overview, Features, Accessories – MagTek MAXI MICR RS232 User Manual

Page 9: Features accessories

Advertising
background image

SECTION 1. OVERVIEW

The MAXI MICR RS232 With Optional 2-Track MSR is both a MICR (Magnetic Ink Character
Recognition) Check Reader and an MSR (Magnetic Stripe Reader).

The MICR Reader, in a typical application, reads the magnetic data encoded on the bottom of
checks or magnetic stripe cards and transmits this data to a Host device. The Host device then
uses a specific authorization or verification process to validate a business transaction.

The use of the MICR Reader improves accuracy and speed because there is no manual data
entry; therefore there are no keying errors or unwanted delays.

The MICR Reader will communicate with the Host system using a standard RS-232 interface.
All data is transmitted as ASCII characters (See Appendix F). The MICR Reader has the
capability of supporting some hardware handshaking signals. (See Section 4, Commands.)

FEATURES

•

Available with MICR Reader only or with 2-Track MSR (interface cable included – DB25
female connector to PC).

•

Automatic parsing of MICR fields: transit, account, etc.

•

Extensive list of formats to transmit MICR data.

•

Optional error/status reporting for check reading.

•

Reads E13-B and CMC-7 MICR fonts.

•

In addition to the RS-232 interface, the MICR Reader is also available with other interfaces.


ACCESSORIES

Accessories available for the MICR Reader are as follows:

•

Adapter Cable, DB25 male to DB9 female, Part Number 22017502

•

AC Power Adapter with Cable, 120VAC to 12 VAC, 1 Amp, Part Number 64300050

•

SET-MICR Demo Program, Part Number 22000020

•

MICR Reader Cleaning Card, Part Number 96700006

•

Sample Checks, Part Number 96530005

Advertising