Horner APG XL7 OCS - Manual (Page 56)

XL7 User Manual
Warning = Time and date need to be set
I/O System
Ok = I/O configuration matches the installed I/O and COM modules
Warning = I/O configuration needs updating to match installed modules
Battery
Ok = Backup battery operating properly
Warning = Backup battery needs to be replaced
View I/O Slots
The View I/O Slots Sub-Menu displays three System Settings, none of which may be edited.
Internal to the XL7 OCS, there is a CPU board, and up to two installed modules. Model XW100 has no
installed I/O or COM modules. All other models have an I/O module and can have a user-installed COM
module.
Depending on which I/O module is installed and which I/O module has been configured by Cscape, one
of the following six System Settings should appear for Slot 1:
Slot 1: I/O: Empty = No I/O module installed or configured
Slot 1:*Unsupported = Unsupported I/O module installed
Slot 1:-I/O Missing = No I/O module installed but an I/O module is configured
Slot 1:+I/O: XExyy = yy I/O module installed but no I/O module configured
Slot 1:?I/O: XExyy = yy I/O module installed but another I/O module configured
Slot 1: I/O: XExyy = yy I/O module installed and configured properly
Depending on the COM module that is installed and the COM module that has been configured by
Cscape, one of the following six System Settings appears for Slot 2:
Slot 2: I/O: Empty = No COM module installed or configured
Slot 2:*Unsupported = Unsupported COM module installed
Slot 2:-I/O Missing = No COM module installed but a COM module is configured
Slot 2:+I/O: XzC = z COM module installed but no COM module configured
Slot 2:?I/O: XzC = z COM module installed but another COM module configured
Slot 2: I/O: XzC = z COM module installed and configured properly
Slot 3: I/O: ETN300 = ETN300 has been configured through Cscape
Page 56 of 110