Horner APG XL7 OCS - Manual (Page 80)

XL7 User Manual
15.3 Establishing Communications
The preferred method of communicating between Cscape and an XL7 OCS is via USB port. The XL7 OCS
can communicate with Cscape using USB to USB, USB to serial adapters, serial port communications via
MJ1 Port, Ethernet, CAN (CsCAN) or modems. For communications other than USB or the MJ1 port
please refer to the manual which ships with the communications adapter hardware being used for
programming.
To communicate with the XL7 via USB you will need the automated driver installer located on the
Horner APG web site.
For XL7 use Cscape Ver 9.30 SP6 or newer.
Next, connect a PC’s (Personal Computer running a Windows Microsoft operating system) USB port via
USB cable to the USB mini B port on the XL7 OCS.
Figure 15.2 – USB Programming Connector
The PC will detect a new device has been plugged into the USB port.
Page 80 of 110