Telephone operation, Volume, Mute – AT&T 2455 User Manual
Page 12: Hold, Line in use
TELEPHONE OPERATION
10
Volume
1
During a call, select
VOLUME, then use the softkeys to adjust the
earpiece volume.
2
Select
OK to save the setting for future calls.
Mute
Mute allows you to hear your caller, but prevents the caller from
hearing you.
1
Use the softkey to select
MUTE. The screen alternately displays
MICROPHONE MUTED! and the previous screen.
2
Select
MUTE again to return to your conversation.
Hold
When you put a call on hold, you cannot hear your caller, and your caller
cannot hear you.
1
Use the softkey to select
HOLD. The screen displays
CALL ON HOLD.
2
Press
P
or
k
to return to the call.
NOTE: The handset rings to remind you that the call is being held.
If you don’t answer the ring, the call is disconnected.
Line in Use
•
When the line is in use by a handset or
base, the screen display is similar to:
•
When the line is in use by another set on
the same line, the screen displays:
EXTENSION
IN USE!!
VOL
MENU
MUTE
2
02 NEW CALLS
RDL
MENU
MEM