AT&T 2455 - Manual (Page 31)

29
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
Remote Access Commands
Function: Command:
Play messages in Press
#, then the appropriate mailbox
a mailbox number ( 1, 2, or 3). The system plays
new messages. If there are no new
messages, the system plays old messages.
Repeat a message Press
# 4 while message is playing;
each press backs up another message.
Skip a message Press
# 6 while message is playing;
each press advances another message.
Stop Press
# 5.
Save messages Hang up.
Delete message Press
# 9 while message is playing.
Review announcement Press
# 7; system plays announcement,
then beeps.
Record announcement Press
* 7; after beep, record
announcement, press
# 5 to stop.
System plays back announcement.
Record memo Press
* 8; then mailbox number where
you want memo recorded; speak after
beep; press
# 5 to exit.
End remote access call Press
* 0.
Turn system off Press
# 0; the system announces,
“The machine is off.” Press
# 0 again
to turn the system back on.
Turn system on When system is off, it answers after 10
rings and announces, “Please enter your
security code.”
Press
#, then enter your
remote access code.
NOTE: The remote access call will automatically end if 20 seconds go by
with no key being pressed (other than when recording or playing
messages or announcements).