Front panel menu reference – Agilent Technologies Switch/Measure User Manual
Page 18
6
34980A User’s Guide
1
Introduction to the 34980A
Front Panel Menu Reference
This section gives an overview of the top two levels of menus that you access
from the front panel. The menus are designed to automatically guide you
through all parameters required to configure a particular function or
operation.
Store/Recall
Store and recall instrument states
•
Store up to six instrument states in non-volatile memory
•
Assign a name to each storage location.
•
Recall stored states, power-down state, factory reset state, or preset state
Utility
Configure system-related instrument parameters
•
Connecting and configuring to use with LAN, GPIB, or USB
•
Set the real time clock and calendar
•
Set radix character, thousand separator
•
Enable/disable the internal DMM
•
Secure/unsecure the instrument for calibration
•
Query and update the firmware revisions for the mainframe and modules
Configure Key Group
Set parameters for measurement
DMM
•
Set DMM measurement function (AC volts, DC volts, AC current, DC current, 2-wire ohms, 4-wire ohms,
temperature, frequency, and period
•
Set function parameters
Channel
•
Set channel measurement function (AC volts, DC volts, AC current (34921A only), DC current (34921A only)
2-wire ohms, 4-wire ohms, temperature, frequency, and period
•
Set function parameters
Scan
•
Set up trigger-in parameters
•
Set up sweep count
•
Set up sample count
Sequences
Available at a later firmware release
Module
•
Open all relays
•
Clear all measurement functions
•
Clear channel labels
•
Configure external trigger and clock (34951A)
•
Set trace or level mode (34951A)
•
Set waveform parameters (34951A)