A.1.1 water content only – Campbell Scientific EasyAG Probe for Soil Volumetric Water Content Profiles User Manual

Page 20

Advertising
background image

Appendix A. Normalization and Function Test

Start the IPConfig Utility (Intelligent Probe Utility Software, P/N SEN06025)
on the PC by clicking on the IPConfig Utility icon (shown in Figure A-3).

FIGURE A-3. IPConfig Utility Icon

Click “Connect” in the upper right area of the IPConfig window. The software
will connect to the probe and set up a configuration window.

A.1.1 Water Content Only

FIGURE A-4. IPConfig Probe Configuration Window

Figure A-4 shows an IPConfig Utility Probe Configuration window after
normalization is complete on a three-sensor probe with sensors placed at 10,
20, and 30 cm. Complete the following operations for a new probe:

A-2

Advertising