3. bridge mode disabled – Campbell Scientific NL240 Wireless Network Link Interface User Manual

Page 16

Advertising
background image

NL240 Wireless Network Link Interface

(R2-232 and CS I/O) is only associated with one service (PakBus router, serial

server, Modbus/TCP Gateway, etc.) at a time. For example, you can have an

RS-232 serial server and a CS I/O serial server, an RS-232 serial server and a

CS I/O PakBus router, an RS-232 PakBus router and a CS I/O serial server, or

an RS-232 PakBus router and a CS I/O PakBus router. In addition, the NL240

can act as TLS proxy server. The TLS proxy server is independent of other

modes.

FIGURE 4-3. Bridge Mode disabled

Some reasons you might want to use each of these modes are described below.

Refer to Section 7, Configuring the NL240, and Section 8, Operation, for

information on setting up your NL240 for each mode.

6

Advertising