Campbell Scientific RTMC Pro Real-Time Monitor and Control Professional Software - Manual (Page 18)

RTMC Pro
Displays Rainflow data on a chart. In run-time
mode, a portion of the chart can be “zoomed in
on” by dragging a frame around the area to be
viewed. Right-clicking the chart will bring up a
menu that allows the chart to be printed, copied,
saved, or zoomed to all data. If the Allow Run-
time Customization check box is selected in
RTMC Pro, this menu will also include a
Customize item that allows the Run-time user to
change any of the Rainflow Chart’s properties.
Note: RTMC Pro does not create rainflow data
from time series information. It only displays
rainflow data. Rainflow data is created by using
the CRBasic Rainflow or RainflowSample
instruction in a CRBasic program Data Table.
Displays the data from a datalogger table in a row
and column format. In run-time mode, right-
clicking the table will bring up a menu that allows
the table to be printed, copied, or exported.
Displays wind speed and wind direction from a
datalogger table in the form of a wind rose.
Value Setters Tab
Depicts the selected data value as a single
horizontal or vertical bar. In run-time mode, the
data value can also be set to a new value by
dragging the slider.
Like the Digital component, depicts the selected
data value as a numeric value, text string, or
Boolean. However, in run-time mode, a data value
can also be set to a new value by double-clicking
the component and entering a new value in the
resulting dialog box.
In run-time mode, reads a value in a datalogger
and writes to another value in that datalogger or a
different datalogger. The value that is written can
be the value read, a 0 or -1, or a specified constant.
Note that in RTDAQ, RTMC projects are limited
to a single station. Therefore, the value read can
only be forwarded to another value in the same
datalogger.
Depicts the selected data value as a pointer on a
dial. In run-time mode, the data value can also be
set to a new value by dragging the pointer.
12