Campbell Scientific RTMC Pro Real-Time Monitor and Control Professional Software - Manual (Page 66)

RTMC Pro
Datalogger
In these examples, you are directly accessing the datalogger at 192.168.12.55.
92.168.12.55/?command=browsesymbols&format=html
ml
the Public
ble:
68.4.14/?command=browsesymbols&uri=Public.flag&format=
html
4.4.3 Control Commands
The SetValueEx command is used to set a value in the datalogger. For the CSI
must
the same session) or the command will fail.
mand will fail. SetValueEx has the following
parts:
should be set in the format of
source_name:station_name.table_name.field_name.
hich the URI should be set.
ult of the command.
Options are HTML, JSON, or XML. A result code and
Code Description
• To return all tables in a datalogger:
http://1
• To return all fields in the Public table:
http://192.168.4.14/?command=browsesymbols&uri=Public&format=ht
• To return all the elements in the Flag array, which is part of
ta
http://192.1
SetValueEx
Web Server, a user name and password that has at least read/write rights
be entered (or previously entered in
Likewise, for direct datalogger access, if a .csipasswd file has been sent to the
datalogger, a user name and password must be entered (or previously entered
in the same session) or the com
URI The URI specifies the value that
Value The new value to w
Format The Format is the file format for the res
description are returned.
0 An unrecognized failure occurred
rNet
sources only)
4 Blocked by LoggerNet security (LoggerNet
data sources only)
5 Read only
1 Success
2 The data-source connection failed (Logge
data sources only)
3 LoggerNet logon failed (LoggerNet data
60