Campbell Scientific RTMC Pro Real-Time Monitor and Control Professional Software - Manual (Page 72)

RTMC Pro
FileControl
The FileControl command allows you to perform actions on files that are
leControl can only be
used when accessing a datalogger directly and not through the CSI Web
r. The com
and is optional for Actions 7, 8, 9, 11,
and 12.
File2 or the command. This
command is used for options 15, 16, 17, 18, 19, and 20.
Action supported:
located on one of the datalogger's drives. Note that Fi
Serve mand has the following parts:
File The name of the file on which to perform the file control
operation. This comm
The name of the second file required f
The following actions are
Code Description
1 Compile and run the file specified by File and
mark it as the program to be run on power up.
ram
3 Mark the file specified by File as hidden.
Compile and run the file specified by File
without deleting existing data tables.
7 Stop the currently running program.
8 Stop the currently running program and delete
9 Install the operating system (*.obj) specified by
er's
CPU drive (sent to the datalogger using
10 Compile and run the program specified by File
but do not change the program currently
marked to run on power up.
11 Pause execution of the currently running
used
program.
13 Stop the currently running program, delete its
associated data tables, run the program
2 Mark the file specified by File as the prog
to be run on power up.
4 Delete the file specified by File.
5 Format the device specified by File.
6
associated data tables.
File. The file must reside on the datalogg
HTTPPut)
program.
12 Resume execution of the currently pa
66