Campbell Scientific RTMC Pro Real-Time Monitor and Control Professional Software - Manual (Page 68)

RTMC Pro
• To check th lock of the C
http://192.1
tml
• To check th :
http://192.1
.14/weathe &URI=Server:CR1000
_ip&format=html
Datalogger
e c SI Web Server:
68.4.14/weather/?command=clockcheck&format=h
e clock of the CR1000 in the LoggerNet server data source
68.4 r/?command=clockcheck
In this example, you are directly .168.12.55.
• To check th ck of the d
http://192.1
2.55/?comm
ClockSet
Sets the time for the station specified by the URI. For the CSI Web Server, a
user name and password that has at least read/write rights must be entered (or
previously entered in the same
Likewise,
for direct datalogger access, if a .csipasswd file has been sent to the datalogger,
a user name and
session) or the c
URI The URI can be specified as URI=source_name:station_name.
For direct datalogger access, the URI can be omitted.
nd.
With ClockSet, the time returned is
the time before the clock was set.
Code Description
accessing the datalogger at 192
e clo atalogger:
68.1 and=clockcheck&format=html
session) or the command will fail.
password must be entered (or previously entered in the same
ommand will fail. ClockSet has the following parameters:
Time The time to set the clock to, in the format of YYYY-MM-DD
T:HH:MM:SS.MS. MS is optional.
Format The Format is the file format for the result of the comma
Options are HTML, JSON, or XML.
A result code, time, and description are returned for
ClockCheck and ClockSet.
1 The clock was checked (successful)
3 The LoggerNet session failed (LoggerNet data
sources only)
Invalid LoggerNet logon (LoggerNet data
sources only)
data sources only)
2 The clock was set
4
5 Blocked by LoggerNet security (LoggerNet
62