ADTRAN TRACER 5045 - Manual (Page 40)

Section 5 User Interface Guide TRACER 5045 System Manual
40 © 2004 ADTRAN, Inc. 612805045L1-1B
1. NAVIGATING THE TERMINAL MENU
The TRACER 5045 menu system can be accessed with a VT100 compatible terminal that is connected to
the RS-232 port (located on the back of the unit) and set to 9600 bits per second, 8 data bits, 1 stop bit, and
no parity. Flow control on the serial interface should be configured to
N ONE
for proper operation. Once a
terminal is connected, press <Ctrl + L> to refresh the current screen. If password access has been enabled,
the
E NTER P ASSWORD
message displays at the bottom of the TRACER 5045 System Status menu.
Terminal Menu Window
The TRACER 5045 uses a series of menu pages and a single Main Menu page to access its many features.
The Main Menu page (see Figure 1) provides a link to all available configuration/status pages.
Figure 1. Main Menu Screen
All TRACER 5045 systems are shipped factory default with password protection disabled.
After connecting a VT100 terminal to the TRACER 5045, press <Ctrl + L> to redraw the
current screen.