ADTRAN TRACER 5045 - Manual (Page 41)

TRACER 5045 System Manual Section 5 User Interface Guide
612805045L1-1B © 2004 ADTRAN, Inc. 41
Navigating using the Keyboard Keys
You can use various keystrokes to move through the terminal menu, to manage a terminal menu session,
and to configure the system.
Moving Through the Menus
2. TERMINAL MENU AND SYSTEM CONTROL
Password Protection
The TRACER 5045 provides optional password protection of the terminal interface. If enabled, a password
prompt is presented at power-up, reboot, modem logout, or after ten minutes of inactivity on the terminal.
The password is enabled and defined via the System Configuration menu.
3. MENU DESCRIPTIONS
The remainder of this section describes the TRACER 5045 menus and submenus.
To do this... Press this key...
Refresh the screen <Ctrl + L>
Move up to select items Up Arrow
Move down to select items Down Arrow
Edit a selected menu item Enter
Scroll through configuration parameters for a menu item Spacebar
Left/Right Arrows
P or N (Prev/Next)
Cancel an edit Escape
Return to Main Menu page M
Access the TRACER 5045 Status page 0
Access the STRACER 5045 System Configuration Menu 1
Display the TRACER 5045 Link Performance History 2
Display the TRACER 5045 Ethernet Switch Status page 3
All TRACER 5045 systems are shipped factory default with password protection disabled.
The menu structure of the TRACER 5045 system is depicted below as follows:
> M ENU P AGE
> M ENU P AGE
> M ENU S ELECTION
> M ENU P AGE
> M ENU S ELECTION
> S UB -M ENU