ADTRAN TRACER 5045 User Manual
Page 43
TRACER 5045 System Manual
Section 5 User Interface Guide
612805045L1-1B
© 2004 ADTRAN, Inc.
43
on the interface. A separate Ethernet status page is accessible from the Main Menu to provide detailed
Ethernet information.
E. Remote TRACER Status
The right portion of the TRACER 5045 System Status menu page reports the status of the remote
TRACER 5045 (the system across the wireless link from the active terminal). If the RF link is down in
either direction,
D
ATA
N
OT
A
VAILABLE
is displayed in place of the remote system status information.
F. Local TRACER Status
The left portion of the TRACER 5045 System Status menu page reports the status of the local
TRACER 5045 (the system where the active terminal is attached).
G. Frequency Plan
Displays the frequency plan (A or B) for the TRACER 5045 unit. For an operational TRACER 5045
system, you should have one A and one B frequency plan.
H. Rx Quality
Displays an indicator of receive signal quality that is not necessarily related to receive signal level (for
both the local and remote units) using a series of symbols (
#
). The more symbols displayed, the better
the signal quality. This indicator is related to signal-to-noise ratio and features a colon (:) marker to
indicate 10
-6
bit error rate. This indicator is useful as a diagnostic tool to help identify interference, as
the system may have high receive signal level and poor signal quality in situations where interference
is an issue.
I. Rx Power
Displays the approximate receiver levels (for both the local and remote units) using a series of symbols
(
#
). The more symbols (
#
) displayed, the stronger the signal. If the link is down in either direction and
remote end data is unavailable,
D
ATA
N
OT
A
VAILABLE
is displayed in place of the symbols (
#
).
J. Tx Power
Displays the approximate transmitter levels (for both the local and remote units) using a series of
symbols (
#
). The more symbols (
#
) displayed, the stronger the signal. If the link is down in either
direction and remote end data is unavailable,
D
ATA
N
OT
A
VAILABLE
is displayed in place of the symbols
(
#
).
K. Navigation Reminders
Displays system navigation reminders. For more details on system navigation, refer to Navigating the
Terminal Menu on page 40.