Samsung SC-D5000-XAC - Manual (Page 64)

ENGLISH
59 59
Using the CAMCORDER - Advanced Recording
● EIS (Electronic Image Stabilizer)
✤ The EIS function works in CAMCORDER mode only.
✤ EIS (Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the
camcorder (within reasonable limits).
✤ It provides more stable pictures when:
■ Recording with the zoom
■ Recording a small object close-up
■ Recording and walking at the same time
■ Recording through the window of a vehicle
1. Set the device to CAMCORDER and set the power switch to REC mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL highlight to CAMCORDER and press the MENU DIAL.
■ The sub-menu list will appear.
4. Select RECORD SET from the sub-menu and press the MENU DIAL.
5. Turn the MENU DIAL to activate the EIS function, then press the MENU DIAL.
■ The EIS menu is changed to ON.
■ If you do not want to use the EIS function, set the EIS menu to OFF.
6. To exit, press the MENU button.
Note
■ It is recommended that you deactivate the shake compensation function when using a tripod.
CAMCORDER REC MODE
INITIAL
RECORD SET
PLAY SET CAMCORDER
CAMERA
MEMORY
VIEWER
CAMCORDER REC MODE
CAMCORDER SET
RECORD SET
PLAY SET
CAMCORDER REC MODE
CAMCORDER SET
RECORD SET
REC SELECT
REC MODE
EIS
D. ZOOM
PROGRAM AE
WHT. BALANCE TAPE
SP
00655B SCD5000 (034~069) 6/11/03 2:19 PM Page 59