Samsung SC-D5000-XAC - Manual (Page 87)

ENGLISH
82 82
IEEE 1394 Data Transfer
● System Requirements
■ CPU : Intel ® (or compatible) Pentium III™ 450Mhz or faster.
■ Operating System : Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■ Main Memory : More than 64 MB RAM
■ IEEE1394 Add-On Card or Built In IEEE1394 Card
Recording with a DV Connection Cable
1. Set the device to CAMCORDER and the power switch to TAPE PLAY mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
■ Make sure that DV IN appears on the screen.
3. Press the PLAY button of the CAMCORDER.
■ Picture is displayed on PC screen.
4. Click on the REC button on PC screen with the mouse.
5. To stop recording, click the (STOP) button on the PC screen.
Note
When using this camcorder as a recorder, the pictures that appear on the monitor may seem uneven,
however recorded pictures will not be affected.
FADE
S.SHOW BLC
REV FWD
DELETE
TAPE
MEMORY
REC
PLAY
00655B SCD5000 (070~109) 6/11/03 2:20 PM Page 82