Samsung SC-D5000-XAC - Manual (Page 91)

ENGLISH
86 86
Using the CAMERA
✤ File numbers will be given to images in order of recording when still images are stored in the Memory Stick.
✤ MEMORY FILE NUMBERS may be set as follows:
■ SERIES: When there are existing files, the new image will be named as the next number in the sequence.
■ RESET
- When there are no files stored in the Memory Stick: The file numbering starts from 0001
- When there are files stored in the Memory Stick: File numbering will continue after the last file's number
1. Set the device to CAMERA and set the Power Switch to REC mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight MEMORY and press the MENU DIAL.
4. Turn the MENU DIAL to activate the FILE NO. and press the MENU DIAL.
5. To exit, press the MENU button.
Notes
■ When using a Memory Stick that contains image files from another device, the file numbering
will begin after the largest number that is memorized whether in the camera or the the Memory
Stick.
■ File numbering starts from 0001 again when 9999 files have been saved.
MEMORY FILE NUMBER
M. PLAY SELECT
PHOTO SET
MPEG4 SIZE
PRINT MARK
PROTECT
FILE NO
DELETE
FORMAT
CAMERA REC MODE
INITIAL
CAMCORDER
CAMERA
MEMORY
VIEWER
M. PLAY SELECT PHOTO
PHOTO SET
MPEG4 SIZE 320X240
PRINT MARK
PROTECT
FILE NO SERIES
DELETE
FORMAT
CAMERA REC MODE
MEMORY SET
000
00655B SCD5000 (070~109) 6/11/03 2:21 PM Page 86