Samsung SC-D5000-XAC - Manual (Page 80)

ENGLISH
75 75
✤ The NITE PIX function works in CAMCORDER mode only.
✤ The POWER NITE PIX function can record a subject more brightly in darkness than the NITE PIX function.
✤ POWER NITE PIX is displayed for three seconds on the LCD if you press the SLOW SHUTTER button when the NITE PIX
switch is turned on.
✤ When you work in POWER NITE PIX mode, the POWER NITE PIX icon appears on the LCD continuously.
1. Set the device to CAMCORDER and set the power switch to REC mode.
2. Turn on the NITE PIX switch, and then press the SLOW SHUTTER button.
3. Press the SLOW SHUTTER button to set the shutter speed. The SLOW SHUTTER function
enables you to record a subject more brightly.
4. When using POWER NITE PIX the image takes on a slow motion like effect.
5. To cancel the POWER NITE PIX function, press the SLOW SHUTTER button until it is set to
“ OFF ” and then turn off the NITE PIX switch.
Notes
■ The maximum recording distance using the infrared light is about 3 m (about 10 feet).
■ If you use the POWER NITE PIX function in normal recording situations (ex. outdoors by day), the recorded picture may
contain unnatural colors.
■ In POWER NITE PIX mode, certain functions are not available, such as White Balance, Program AE, DSE, BLC.
■ When the subject is too bright, it is better to press the SLOW SHUTTER button (S1/8 ➝ S1/30) so that you can record with
better quality.
Using the CAMCORDER - Advanced Recording
POWER NITE PIX
POWER NITE PIX
P
0 : 0 0 : 0 0
5 5 min
1 2 : 0 0 AM
O C T. 1 0 , 2 0 0 3
STBY
S1/30
00655B SCD5000 (070~109) 6/11/03 2:20 PM Page 75