Samsung SC-D5000-XAC - Manual (Page 79)

ENGLISH
74 74
Using the CAMCORDER - Advanced Recording
✤ The NITE PIX function works in CAMCORDER mode only.
✤ The NITE PIX function enables you to record a subject in darkness.
1. Set the device to CAMCORDER and set the Power Switch to REC mode.
2. Slide the NITE PIX switch to ON.
■ (NITE PIX indicator) appears on the LCD monitor.
■ The infrared(invisible rays) light is turned on automatically.
3. To cancel the NITE PIX function, slide the NITE PIX switch to OFF.
Notes
■ The maximum recording distance using the infrared light is about 3 m (about 10 feet).
■ If you use the NITE PIX function in normal recording situations (ex. outdoors by day),
the recorded picture may be tinted green.
■ While in NITE PIX mode, certain functions are not available, such as White Balance, Program AE, DSE, BLC.
NITE PIX (0 Lux Recording)
00655B SCD5000 (070~109) 6/11/03 2:20 PM Page 74