Alto-Shaam Processing Freezer/Chiller/Refrigeration System QC-3/QC-20/QC-40/QC-50/QC-50 Remote/QC-100/Qc-100 Remote - Manual (Page 7)

QUICKCHILLER • INSTALLATION/OPERATION/SERVICE MANUAL • 5.
S I T E I N S T A L L A T I O N
I N S T A L L A T I O N
Trolley Guide Installation
1. Align each guide rail with the holes located under
the cabinet.
2. Loosely fasten each guide rail with a washer, lock washer
and bolt.
3. Push the roll-in cart (trolley) into the Quickchiller, center
the cart right-to-left, and close the door.
4. Slide both guide rails toward the center of the
Quickchiller until they make contact with the roll-in cart.
Lock the guide rails into position by tightening the bolts.
At the front of the Quickchiller, make certain contact
has been made between the Quickchiller and the cart
along the total width of the door to create a complete
seal. When a full seal has been determined, recheck each
connection to make certain it has been fully tightened.
TROLLEY GUIDE INSTALLATION