Alarm clock – Samsung SPH-M920ZKASPR User Manual
Page 115
101
Ca
lend
ar / T
ools
Alarm Clock
Your device comes with a built-in alarm clock that has
multiple alarm capabilities. There is no limit to the
number of alarm events you can create.
1.
Press
and tap
>
(Alarm Clock)
.
2.
To activate an alarm, tap the checkmark to the
right of the alarm.
3.
To edit an alarm, tap the entry and then tap the
Time
field to adjust the alarm time.
Ⅲ
Adjust the hour and minute by tapping either
or
.
Ⅲ
Tap the
AM
or
PM
button to change the value.
Ⅲ
Tap
Set
when finished.
4.
Tap
Ringtone
to select an audio ringtone that will
sound with the alarm.
Ⅲ
Tap a ringtone to hear an audio sample.
Ⅲ
Tap
OK
to accept the ringtone assignment.
5.
Tap
Vibrate
to add a vibration feature to the alarm.
6.
Tap the
Repeat
field to select a repeating status for
the alarm.
Ⅲ
Place a green checkmark adjacent to the desired
repetition days and tap
OK
.
7.
Select a unique name for this alarm event by
tapping the
Label
field, entering a new label, and
tapping
OK
.
8.
Tap
Done
to store the new alarm event.
Note:
Upon your first launch of the Alarm Clock application,
three alarm presets are set up by default and ready for
you to customize. These alarms are turned off by
default.
Note:
A new alarm can also be created from the Alarm page
by pressing
> Add alarm
.
Note:
The number of hours and minutes left before the alarm
goes off is briefly displayed onscreen after you set the
new alarm time.
Note:
To allow the alarm to sound even while the device is in
silent mode, press
and tap
Settings
, then activate
the
Alarm in silent mode
field.
SPH-M920.book Page 101 Friday, October 8, 2010 2:17 PM