Samsung SPH-M920ZKASPR - Manual (Page 70)

56 2B. Making and Answering Calls
ⅷ Bluetooth to route the device’s audio through a
connected Bluetooth headset ( On ) or through the
speaker ( Off ). (See “2J. Bluetooth” on page 127.)
Ⅲ When the call is routed to a Bluetooth headset,
the current call area shows the
Bluetooth call
icon ( ).
● To route the current call back to the device,
tap Headset to temporarily use the device. Tap
Bluetooth again to route the call back to the
connected Bluetooth headset.
Ⅲ When Bluetooth or the Bluetooth headset is
turned off, the call is routed through either the
earpiece or speaker and shows (
).
Touch and drag Dialpad (l ) up to use the
onscreen dialpad to enter additional numbers, for
example, an extension or access code.
Ⅲ For example: When you call your bank’s 800
number, use your dialpad to enter your account
number and PIN.
End-of-Call Options
1. After you receive a call from or make a call to a
phone number that is not in your Contacts, locate
the number in your Call log list.
2. Tap the number to view options, or tap to call
back the entry.
Additional Calling Options
To obtain additional options such as phone number
and the duration of the call, you must access the Call
log screen. (See “2D. Call Log” on page 81.)
1. Press and then tap > Call log
( ).
2. Touch and hold the entry to reveal an onscreen
context menu where you can choose from the
following options:
Ⅲ Call [Number] to redial the current phone number.
Ⅲ Edit number before call to make alterations to the
current phone number prior to redial. (See
“Altering a Number From Call Log” on page 85.)
Note: The Headset button is activated to show the current call
is routed to the connected Bluetooth headset.
Call log
SPH-M920.book Page 56 Friday, October 8, 2010 2:17 PM