Samsung SPH-M920ZKASPR - Manual (Page 139)

2I. Camera 125
Ca
me
ra
Ⅲ Camcorder settings to access camcorder
hardware settings:
● Recording Mode to set the size limit for the
recorded video. Choose from: Normal (limited
by SD card) or MMS (limited by MMS size
restrictions) .
● Video quality to set the image quality for your
video. Choose from: Low (176x144) or High
(352x288) .
● Video duration to set the length for your video.
Choose from: 30 seconds (sending the video
in an MMS/video message), 10 minutes (SD
card storage), or 30 minutes (SD card storage).
● Flash mode to activate the built-in flash and
provide an additional light source for new
videos taken with the Samsung Transform. Set
to
On , Off or Auto .
● White balance to compensate for color
differences found within different lighting
conditions. Choose from:
Auto (default),
Incandescent , Daylight , Fluorescent , or Cloudy .
● Color effect to apply different color effects onto
videos. Choose from: None (default), Mono ,
Sepia , Negative , Aqua , or Whiteboard .
2. Press to return to the previous screen.
Camcorder Gallery Options
Accessing the gallery provides access to videos.
1. Press and tap > (Gallery) .
– or –
While in camcorder mode, press and tap
Gallery .
2. From Camera videos gallery, tap a video icon to
playback the videos taken stored on your microSD
card.
– or –
Highlight a video icon and press to reveal
gallery-specific options for the Camera videos:
Note: Tapping the right side panel also provides
access to the camcorder’s settings.
Note: The Video quality option is disabled when the
Recording mode is set to MMS .
SPH-M920.book Page 125 Friday, October 8, 2010 2:17 PM