Samsung SPH-M920ZKASPR - Manual (Page 69)

2B. Making and Answering Calls 55
Calls
In-Call Options
Once you initiate a call, you
will see three onscreen
options.
ⅷ End call ( ) to end the
current call. (Touch and drag
to the right.)
ⅷ Speaker ( ) to route the
device’s audio through the
speaker (On) or through the
earpiece (Off). (Touch and
drag to the left.)
ⅷ Dialpad ( ) to enter
dial tones using the onscreen dialpad. (Touch and
drag up.)
To see additional options, tap .
ⅷ Show/Hide dialpad to toggle the appearance of the
onscreen dialpad.
ⅷ Add call to initiate a 3-way call (page 146). This can
take up to 20 seconds to become available.
ⅷ Merge calls to join two currently active calls
(conference).
ⅷ End call to end the current call.
ⅷ Mute/Unmute to mute the microphone during an
active call. Tap again to unmute the microphone.
ⅷ Speaker to route the device’s audio through the
speaker ( On ) or through the earpiece ( Off ).
ᮣ Activate Speaker to route the device’s audio
through the speaker. (You can adjust the speaker
volume using the volume buttons.)
ᮣ Deactivate Speaker to use the device’s earpiece.
Note: If Mute is activated, the speaker mode is deactivated.
WARNING: Because of higher volume levels, do not place
the device near your ear during speakerphone
use.
SPH-M920.book Page 55 Friday, October 8, 2010 2:17 PM