Samsung SPH-M920ZKASPR - Manual (Page 128)

114 2H. microSD Card
Before You Begin
Here is what you will need to have before you can
successfully establish a connection between your
Samsung Transform and a PC.
ⅷ microSD card (internally installed prior to start)
ⅷ compatible USB cable (included)
1. With the microSD card installed, connect your
device to your computer using a compatible USB
cable. (Wait for the connection to be completed.
When connected, the host computer will
automatically detect your device.)
2. The USB icon ( ) now appears in the top left
Notifications area on your device.
3. Touch and drag down the Status screen to reveal
the Notifications page (or from the Home screen
press
and tap Notifications ).
4. Tap USB connected > Mount to establish the
connection and copy files between your computer
and your device's microSD card.
5. Locate the newly created drive letter on your
computer. You can now begin to use the microSD
card as a storage device.
To remove the connection:
ᮣ When you have finished transferring data, click the
USB device icon on your computer's taskbar, and
follow the onscreen instructions to safely unplug
the USB cable.
Troubleshooting USB Connection
If there is ever a circumstance where your setup of the
device’s USB connection has an issue, try these
troubleshooting tips.
1. Verify your computer is able to access the Internet
prior to connection and that this connection is not
lost during these troubleshooting procedures.
Note: If you experience a setup issue, refer to the
“Troubleshooting USB Connection” on page 114.
Important: The microSD card MUST BE MOUNTED before
your computer detects it and your are able to
communicate with it.
SPH-M920.book Page 114 Friday, October 8, 2010 2:17 PM