American Power Conversion 5000VA - Manual (Page 6)

2 Smart-UPS 5000 VA 208/230 Vac Tower/Rack-Mount 5U User Manual
Specifications
NOTE: The model and serial numbers are located on a small, rear panel label. For some models, an additional label
is located on the chassis under the front bezel.
Installation
Rack-mount configuration
This unit is intended for mounting in a four post rack. To order a two post rack-mount kit contact your dealer or
refer to the APC Web site, www.apc.com.
The UPS and the battery modules are heavy. Remove the battery modules to lighten the UPS during
installation. Refer to the battery removal instructions on the packaging.
Install rack-mount brackets and rail cleats
Four screws must be used to secure each rail bracket and rail cleat to the UPS. One rack-mount bracket and one
rail cleat must be secured to the both sides of the UPS.
Temperature
Operating
Storage
32
°
to 104
°
F (0
°
to 40
°
C)
5
°
to 86
°
F (-15
°
to 30
°
C) charge the UPS battery every six months
86
°
to 113
°
F (30
°
to 45
°
C) charge the UPS battery every three months
This unit is intended for indoor use
only. Select a location sturdy enough
to handle the weight.
Do not operate the UPS where there
is excessive dust or the temperature
or humidity are outside the specified
limits.
Environmental factors impact battery
life. High temperatures, poor utility
power, and frequent, short duration
discharges will shorten battery life.
Maximum
Elevation
Operating
Storage
6562 ft (2,000 m)
50,000 ft (15,240 m)
Humidity 0 to 95% relative humidity, non-condensing
Weight 215 lbs (98 kg) with battery module
107 lbs (49 kg) without battery module
27 lbs (12 kg) each battery module 215 lbs (98 kg)
4x
4x
Rack-mount bracket
four post rack-mount position
Rail cleat