Allied Telesis AT-SBx81CFC960 - Manual (Page 104)

Chapter 5: Installing the Chassis in an Equipment Rack
104 Section II: Installing the Chassis
Removing the Shipping Brace
Now that the chassis is installed in the equipment rack, you may remove
the shipping brace from the front of the unit. To remove the shipping
brace, remove the six mounting screws with a #2 Phillips-head
screwdriver (not provided). Refer to Figure 41.
Figure 41. Removing the Shipping Brace
After removing the shipping plate, go to “Installing the Chassis Grounding
Wire” on page 105.
Shipping Brace Screws