Allied Telesis AT-SBx81CFC960 - Manual (Page 170)

Chapter 8: Installing the Transceivers and Cabling the Ports
170 Section II: Installing the Chassis
Figure 112. Attaching a Fiber Optic Cable to an SFP+ Transceiver in the
AT-SBx81CFC960 Controller Fabric Card
7. Repeat this procedure to install additional SFP+ transceivers in the
AT-SBx81CFC960 Controller Fabric Card.
After cabling the SFP+ transceivers in the AT-SBx81CFC960 Controller
Fabric Card, do one of the following:
 To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
 After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 171.