Allied Telesis AT-SBx81CFC960 - Manual (Page 162)

Chapter 8: Installing the Transceivers and Cabling the Ports
162 Section II: Installing the Chassis
Figure 104. Attaching a Fiber Optic Cable to a Transceiver in the AT-
SBx81XS16 Line Card
6. Repeat this procedure to install additional transceivers in the AT-
SBx81XS16 Line Cards.
After installing and cabling the transceivers, do one of the following:
 To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
 After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 169.