Figure 160: removing the negative lead wire – Allied Telesis AT-SBx81CFC960 User Manual

Page 239

Advertising
background image

SwitchBlade x8106 Chassis Switch and AT-SBx81CFC960 Card Installation Guide

Section II: Installing the Chassis

239

Figure 160. Removing the Negative Lead Wire

6. Use a #3 screwdriver to remove the positive (+) lead wire from the

terminal block. Refer to Figure 161 on page 240.

Advertising
This manual is related to the following products:
See also other documents in the category Allied Telesis Computer hardware: