Allied Telesis AT-2814FX - Manual (Page 17)

AT-2814FX Fast Ethernet Fiber (SC) ExpressCard Installation and User’s Guide
17
LED The AT-2814FX ExpressCard has one LED as shown in Figure 2.
Figure 2. AT-2814FX LED
Table 1 describes the link states that the LED indicates.
Stabilizer
The stabilizer is a plastic bracket to help the ExpressCard snugly fit into
the 54mm PCI ExpressCard slot. Allied Telesis recommends utilizing the
stabilizer when installing the ExpressCard in the 54mm interface slot.
Figure 3. Stabilizer
Table 1. Fiber Optic Port LED Status
State Description
Green The port is operating at 100 Mbps and has a valid
link.
Flashing The port is receiving or transmitting network packets
at 100 Mbps.