Allied Telesis AT-2814FX - Manual (Page 69)

AT-2814FX Fast Ethernet Fiber (SC) ExpressCard Installation and User’s Guide
69
Transmit Buffers
The Transmit Buffers property specifies the number of transmit buffers that
is allocated for the AT-2814FX ExpressCard. Increasing this value may
enhance performance in transmitting traffic, but consumes more system
memory.
To change the Transmit Buffers, do the following:
1. Access the Device Manger on your operating system.
See “Starting the Device Manager” on page 43.
2. Click the Advanced tab.
The Advanced page is displayed. See Figure 21 on page 46.
3. Select the Transmit Buffers property in the Property box.
4. Click on the  in the Value box.
The options are displayed as shown in Figure 36.
Figure 36. Transmit Buggers Page